TWR - Temperature Switch for Liquids
- Details
- Published: Tuesday, 31 July 2012 12:36
- Hits: 11030
 |
FEATURES
|
GENERAL DESCRIPTION
TWR temperature switch is used to provide thermally triggered switching functions for liquids in pipe systems and containers. Individually it can provide temperature alarm features to, for example, insure process compliance with maximum or minimum limits. Pairs of TWR’s can be chosen to provide wide hysteresis (deadband) thermostatic control function to control heating and cooling equipment. The TWR is available in brass or stainless steel and has a 3/4” NPT fitting for direct installation into pipes or tanks.
The contact operates with a preset switchpoint. The switchpoint is factory set, but selectable in 5°C increments between 30°C and 50°C and 10°C increments between 50°C and 120°C. The contacts are available in normally open (N/O) and normally closed (N/C) configurations. Electrical connection to the TWR is achieved via a DIN 43 650 plug. The DIN plug is optionally available with an integrated signal lamp, providing a visual indication of switch condition.
SPECIFICATIONS
| Switchpoint Accuracy: ±9-13°F (±5-7°C) Hysteresis: Max. 20°C (36°F) Max. Temp: 120°C (248°F) Max. Pressure: 64 Bar (928 PSIG) Housing: Ni-plated Brass or 1.4301 (304) SS Fittings: 3/4 NPT Protection: IP65 |
Contact: Function: N/C or N/O Max. Ratings: 250 VAC, 30 VDC, 4 A Switch Point Options in °C (°F) Select when ordering (add to p/n as suffix): 30 ( 86), 35 ( 95) 40 (104), 45 (113) 50 (122), 60 (140) 70 (158), 80 (176) 90 (194), 100 (212) 110 (230), 120 (248) |
ORDERING INFORMATION
DIMENSIONS
