DUK-Compact Ultrasonic Flowmeter
FEATURES
|
|
GENERAL DESCRIPTION
The DUK flow meters are used for measuring, monitoring, metering, and batching of low viscosity fluids. The devices work on the principle of run time difference. Ultrasonic waves in the media are influenced by the rate of flow. Two sensors mounted opposite one another in the pipeline function simultaneously as transmitter and receiver of the ultrasonic signals.
If there is no flow, the run times of both signals are identical. If the media is flowing, then the run time of the signal against the flow is longer than the signal with flow. The run time difference, which is determined by a microprocessor, is proportional to the rate of flow.
The devices can be equipped with a switching output, a fre-quency output or an analog output. In addition, a compact electronic can be selected that features a digital display, a switching output. and an analog output. The device series is rounded off by an optionally available batching or totalizing electronic. The meter electronic indi-cates the momentary flow rate in the first line of the display and the partial or total flow in the second line. A batching electronic controls simple filling tasks and similarly meas-ures flow rates, total amounts and filling amounts. The ana-log output and two relay outputs can be used for further processing of the signals. |
Advantages
Area of Application
|
Technical Details Measuring principle: Ultrasonic Wetted Parts Sensor Housing: Brass or 1.4408 Stainless Steel |
SPECIFICATIONS
Measuring principle: Ultrasonic Range: See Table Media: Liquids with max. 1 % solid Viscosity: Max. 3 cSt Accuracy: ±1.5 % of F.S. Repeatability: ±0.5 % of F.S. Mounting Position: Universal: flow in direction of the arrow (horizontal: electronic on top or below) Straight Piping: 10 x pipe diameter in/out |
Media Temperature: - 4 to 194 °F - 4 to 248 °F (High temperature version) Ambient Temperature: - 4 to 158 °F Response Time: Approx. 0.5...1 s (depending on electronic version) Max Pressure: 230 PSI Pressure Loss: Max. 2.2 PSI at F.S. Protection: IP 65 / NEMA 4 Wetted Parts Sensor Housing: Brass or 1.4408 Stainless Steel\ Sensors: PEEK Seal: NBR (other on request) |
Measuring Ranges and Weights
ELECTRICAL SPECIFICATIONS
DUK-...S300, DUK-...S30D DUK-...F300, DUK-…F390 DUK-...L343 DUK-...L443 (Required with optional AUF-3000) DUK-...C3xx (Compact Electronic) |
DUK-...Ex4R (Totalizing Electronic) DUK-...Gx4R (Batching Electronic)
DUK with ADI Electronic Display: Bar graph and 3.5-digit digital combination display; batch system More technical details see datasheet ADI electronic in the |
ORDERING INFORMATION
DIMENSIONS
Dimensions